基于ANSYS CFX的車用渦輪增壓機壓氣機渦管計算機優化模擬分析

雷汝婧　周天俊

摘 要：運用ANSYS CFX軟件對渦輪增壓器壓氣機渦管內流體進行運動仿真。使用3D模型軟件對基本型號的小型車用渦輪增壓器壓氣機進行3D模型建模，建立出適合流體仿真的流體域3D模型;對渦管內的壓力分布、速度分布、壓力恢復指數分布以及總壓力損失指數分布等參數進行分析，找到設計上的不足并予以改進;通過改進基本型模型的渦管截面形狀，使得渦管內部的紊流減少，渦管壓力恢復指數得以提高，總壓力損失指數得以減少，從而提高壓氣機的進氣壓力并獲得更好的速度矢量分布，使渦輪增壓器壓氣機的工作效率提高。

關鍵詞：渦輪增壓器 壓氣機 渦管 壓力恢復指數 總壓力損失指數

Computational Fluid Simulation Analysis of the Automotive Turbocharge Compressor Volute Based on ANSYS CFX

Lei Rujing Zhou Tianjun

Abstract：Investigating the compressor volute now is a popular way to research the turbocharge. Analysis the CFD results help to modify the shape of volute cross section to improve the pressure ratio and efficiency. In this paper， the ANSYS CFX is used to simulation of the flow inside the volute. First， the compressor 3D model is established which by using 3D software includes the impeller， diffuse and volute， and then making the fluid domain for the simulation. After setting the boundary condition at the compressor design point， the simulation is started. When getting the results which have pressure， velocity vector， pressure recovery coefficient and total pressure loss coefficient， the disadvantage of the basic model is analyzed. Making the modification model which change the shape of the volute cross-section can decrease the vortex inside the volute. The modification model succeeds in increasing the pressure ratio and pressure recovery coefficient. The new turbocharge compressor performance is improved by using the modification volute.

Key words：turbocharge， compressor， volute， pressure recovery coefficient， total pressure loss coefficient