李晨光 陳奎良 韓正陽 周冬生






摘 要:針對鋰電池廠除濕機系統冷凝水無法有效排出、停產期間水封被破壞、后表冷段水封破壞后漏風等問題,分析了影響冷凝水水封的5個主要因素,并介紹了一種可以彌補傳統水封不足的新型乒乓球水封,可有效解決以上問題。此新型水封已運用到鋰電池廠除濕機系統中,實際應用結果表明,可有效將冷凝水排出。
關鍵詞:鋰電池廠;除濕機系統;冷凝水;乒乓球水封
中圖分類號:TH45 文獻標識碼:A 文章編號:1003-5168(2019)34-0059-04
Study on the Influence Factors of Condensate Discharge
in Dehumidifier System of Lithium Battery Factory
LI Chenguang CHEN Kuiliang HAN Zhengyang ZHOU Dongsheng
(CITIC Heavy Industry Machinery Co., Ltd.,Luoyang Henan 471039)
Abstract: In view of the problems of the dehumidifier system of lithium battery plant, such as the condensate water can not be effectively discharged, the water seal was damaged during the shutdown period, and the air leakage after the water seal of the rear surface cooling section was damaged, five main factors affecting the condensate water seal were analyzed, and a new type of table tennis water seal which could make up for the shortage of the traditional water seal was introduced, which could effectively solve the above problems. The new water seal has been used in the dehumidifier system of lithium battery plant. The practical application results show that it can effectively discharge the condensed water.
Keywords: lithium battery factory;dehumidifier system;condensate water;table tennis water seal
鋰電池在生產過程中對濕度要求極其苛刻,如果超過工藝標準,可使單體電池性能衰減,影響電池化成及模組性能,甚至可使電池鼓脹,造成電池報廢。因此,良好的環境濕度是保證鋰電池高性能的重要條件之一。在鋰電池廠中,多以除濕機系統保障生產環境的濕度要求,除濕機系統主要以冷凍除濕和轉輪除濕相結合,達到電池生產的工藝標準。在冷凍除濕時,會產生大量的冷凝水,冷凝水的順利排放是保障除濕機系統正常運行和車間環境濕度的重要條件,因此冷凝水排放問題也成為近期許多國內外學者研究的重點。
孫法森[1]對空調機組冷凝水排水系統進行改進,避免了高速氣流阻礙冷凝水的正常排出。曹陽等[2]討論了空調系統凝結水水封對系統安全運行的重要性和水封設計不當導致設備故障和漏風能耗增加等問題,分析了影響水封設計的5個主要因素,并結合影響因素提出了具體的設計計算方法,介紹了一種可彌補傳統水封不足的新型浮球式水封。……