摘 要:本文設計了一種可用于手動和自動調節的智能臺燈,其采用STM32作為主芯片,4路LED模擬臺燈,通過按鍵來進行自動模式和手動模式的自由切換。手動模式可以通過按鍵來進行臺燈亮度的調節,自動模式可以通過光照傳感器采集光照強度,自動調節LED的亮度。另外還加入了無線控制功能,用手機等移動終端安裝對應的應用后,就可以遠程操控臺燈開關和亮度。
關鍵詞:雙控調節;智能臺燈;STM32
中圖分類號:TM923.44 文獻標識碼:A 文章編號:2096-4706(2018)10-0051-03
Abstract:This paper designs an intelligent desk lamp which can be used for manual and automatic adjustment. It uses STM32 as the main chip,the 4 way LED analog desk lamp,free switching between automatic mode and manual mode by buttons. The manual mode can adjust the brightness of the desk lamp by the button. The automatic mode can collect the light intensity by the light sensor and automatically adjust the brightness of the LED. In addition,the wireless control function is added. After installing corresponding applications with mobile phones and other mobile terminals,the lamp switch and brightness can be remotely controlled.
Keywords:double control regulation;intelligent desk lamp;STM32
0 引 言
在當前技術條件下,臺燈的亮度往往根據使用者手動進行調節,并不能夠根據環境自動調節。臺燈作為常用的照明裝置,其是否被正確使用、對人眼的保護和對近視的防治不無關系。例如,當人們沒有伏案使用時,臺燈更多的是提高整個環境的光照,此時應當提高亮度,當有人在臺燈前伏案工作學習時,太高的光照強度將會導致人眼損傷。本設計采用雙控模式:既可以由用戶手控調節,也可自動調節,另外加入無線控制,用戶還可以通過手機等移動終端WIFI進行燈光亮度的調節,或者開閉臺燈。其采用STM32作為主芯片,4路LED模擬臺燈,通過光照傳感器采集光照強度,調節LED的亮度,無線控制采用型號為ESP8266的WIFI模塊,使用手機連接WIFI時可通過網絡調試助手發送消息給M3,M3根據接受到的消息控制臺燈。
1 方案總體設計
本設計使用STM32為主控芯片,通過STM32自帶的AD轉換,把光照傳感器的模擬量值輸?shù)絊TM的ADC通道,計算出臺燈環境的光強度。使用4路LED模擬臺燈,通過軟件模擬PWM功能,實現LED亮度的調節。……