2024年3期
刊物介紹
《防務技術》(ISSN 1673-002X) 是由中國兵工學會主辦的科技類綜合性學術期刊，創刊于2005年，原名《兵工學報》英文刊，2013年起正式更名為《防務技術》，現為季刊。本刊發表基礎理論、應用科學和工程技術領域高水平原創性學術論文，包括理論研究、數值模擬和實驗研究類文章。其宗旨是通過這個平臺，報道和反映中國和國際防務技術領域的最新學術研究成果，主辦單位力爭在廣大科技工作者的支持下，用較短的時間，將其打造成為國際知名刊物。本刊專業范圍包括：裝甲、彈道、信息、計算機、材料、航空航天、力學等與防務技術相關的各個領域。
Defence Technology
- Explosion resistance performance of reinforced concrete box girder coated with polyurea: Model test and numerical simulation
- An improved initial rotor position estimation method using highfrequency pulsating voltage injection for PMSM
- Target acquisition performance in the presence of JPEG image compression
- Study of relationship between motion of mechanisms in gas operated weapon and its shock absorber
- Data-driven modeling on anisotropic mechanical behavior of brain tissue with internal pressure
- The effect of reactive plasticizer on viscoelastic and mechanical properties of solid rocket propellants based on different types of HTPB resin
- Tuning microstructures of TC4 ELI to improve explosion resistance
- Micro-aluminum powder with bi-or tri-component alloy coating as a promising catalyst: Boosting pyrolysis and combustion of ammonium perchlorate
- The reaction mechanism and interfacial crystallization of Al nanoparticle-embedded Ni under shock loading
- Uncertainty quantification of mechanism motion based on coupled mechanism-motor dynamic model for ammunition delivery system
- Reactive molecular dynamics insight into the thermal decomposition mechanism of 2,6-Bis(picrylamino)-3,5-dinitropyridine
- Effect of the interval between two shocks on ejecta formation from the grooved aluminum surface
- Experimental study on the size effect on the equation of state of concretes under shock loading
- Identifying the enhancement mechanism of Al/MoO3 reactive multilayered films on the ignition ability of semiconductor bridge using a one-dimensional gas-solid two-phase flow model
- Construction of smart propellant with multi-morphologies
- Simple preparation of C (CS)/g-C3N4/Co carbon aerogel and its catalytic performance for ammonium perchlorate
- Interface property of dissimilar Ti-6Al-4V/AA1050 composite laminate made by non-equal channel lateral co-extrusion and heat treatment
- Surface morphologies of Mg-Gd alloy particle during its reactions with O2 and Teflon
- Research on the flow stability and noise reduction characteristics of quasi-periodic elastic support skin
- A review on surface coating strategies for anti-hygroscopic of high energy oxidizer ammonium dinitramide
- Assessing the energy release characteristics during the middle detonation reaction stage of aluminized explosives
- Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives
- Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates
- Synthesis of multifunctional additives for solid propellants: Structure,properties and mechanism
- Numerical and experimental investigation into the evolution of the shock wave when a muzzle jet impacts a constrained moving body
- Hybrid pedestrian positioning system using wearable inertial sensors and ultrasonic ranging
- A semantic segmentation-based underwater acoustic image transmission framework for cooperative SLAM
- Underdetermined direction of arrival estimation with nonuniform linear motion sampling based on a small unmanned aerial vehicle platform
- Automatic modulation recognition of radiation source signals based on two-dimensional data matrix and improved residual neural network
- Jet formation and penetration performance of a double-layer charge liner with chemically-deposited tungsten as the inner liner
- Ultra reliability and massive connectivity provision in integrated internet of military things (IoMT) based on tactical datalink
- Anti-aging performance improvement and enhanced combustion efficiency of boron via the coating of PDA
- Research on the influences of motion characteristics of jetting projectile charge under water
- Theoretical and numerical research on the dynamic launch response of carbon fiber composite cartridges
- Composition optimization and performance prediction for ultra-stable water-based aerosol based on thermodynamic entropy theory
- Sandwich structures with tapered tubes as core: A quasi-static investigation
- A multi-source information fusion layer counting method for penetration fuze based on TCN-LSTM
- Collaborative positioning for swarms: A brief survey of vision, LiDAR and wireless sensors based methods
- A guidance and control design with reduced information for a dualspin stabilized projectile
- Research on aiming methods for small sample size shooting tests of two-dimensional trajectory correction fuse
- Disturbances rejection optimization based on improved two-degreeof-freedom LADRC for permanent magnet synchronous motor systems
- Numerical study on the blocking effect of skin on Flash-Ball Impact and damage assessment
- Estimation of surface geometry on combustion characteristics of AP/HTPB propellant under rapid depressurization
- Investigation of hydroxyl-terminated polybutadiene propellant breaking characteristics and mechanism impacted by submerged cavitation water jet
- Free-walking: Pedestrian inertial navigation based on dual footmounted IMU
- Vulnerability assessment of UAV engine to laser based on improved shotline method
- MTTSNet:Military time-sensitive targets stealth network via real-time mask generation
- Evolution of molecular structure of TATB under shock loading from transient Raman spectroscopic technique