Total contents

Total contents

No. 1

Research Articles

1 A design constraint for a double-acting telescopic hydraulic cylinder in a hydraulic erecting system Xiao-long ZHANG, Jun-hui ZHANG, Min CHENG, Shen ZHENG, Bing XU, Yu FANG

14 A biomimetic robot crawling bidirectionally with load inspired by rock-climbing fish Jin-rongWANG, Yong-xin XI, Chen JI, Jun ZOU

27 Aerodynamic performance of distributed electric propulsion with wing interaction Yao LEI,Wen-jie YANG, Yi-yong HUANG

40 A new technique for high-fidelity cutting technology for hydrate samples Hai ZHU, Jia-wang CHEN, Zi-qiang REN, Pei-hao ZHANG, Qiao-ling GAO, Xiao-ling LE,Chun-ying XU, Kai HE, Peng ZHOU, Feng GAO, Yu-ping FANG

55 Normal gravity model for inertial navigation of a hypersonic boost-glide vehicle Kai CHEN, Cheng-zhi ZENG, Sen-sen PEI,Wen-chao LIANG

68 Effects of the outlet pressure on two-phase slug flow distribution uniformity in a multi-branch microchannel Peng-fei ZHANG, Xiang-guo XU, Yong-jun HUA, Yu-qi HUANG

No. 2

Research Articles

83 Computational fluid dynamics analysis on flow-induced vibration of a cryogenic poppet valve in consideration of cavitation effect Ai-bo WEI, Rong GAO,Wei ZHANG, Shun-haoWANG, Rui ZHOU, Xiao-bin ZHANG

101 Cavitation evolution and damage by liquid nitrogen in a globe valve Xia ZHOU, Xiao-qin ZHI, Xu GAO, Hong CHEN, Shao-long ZHU, KaiWANG, Li-min QIU, Xiao-bin ZHANG

118 A novel multi-level model for quasi-brittle cracking analysis with complex microstructure Xiao-xiao SUN, Xiang-yu CHEN, Xiao-ming GUO

140 Experimental and theoretical study on the break phenomenon of self-pulsation for liquid-centered swirl coaxial injectors Peng-jin CAO, Xiao BAI, Qing-lian LI, Peng CHENG

Erratum

156 Erratum to: Effects of the geometrical parameters of the injection nozzle on ethylene-air continuous rotating detonation Wei-jie FAN, Jin ZHOU, Shi-jie LIU, Hao-yang PENG

No. 3

Review

157 Development of amphibious biomimetic robots Xiang-juan BAI, Jian-zhong SHANG, Zi-rong LUO, Tao JIANG, Qian YIN

Research Articles

188 Leap trajectory tracking control based on sliding mode theory for hypersonic gliding vehicle Kai AN, Zhen-yun GUO,Wei HUANG, Xiao-ping XU

208 A comparison study between 2D and 3D slope stability analyses considering spatial soil variability Liang ZHANG,Wen-ping GONG, Xin-xin LI, Xiao-hui TAN, Chao ZHAO, LeiWANG

225 Multi-objective aerodynamic shape optimization of a streamlined high-speed train using Kriging model Le ZHANG, Zhi-yuan DAI, Tian LI, Ji-ye ZHANG

No. 4

Special Issue on Flow Control & Smart Valve

Guest Editor-in-Chief and Guest Editors: Jin-yuan QIAN, Wei WU, Min CHENG, Jun-hui ZHANG

Editorial

243 Practice of flow control and smart valves Jin-yuan QIAN,Wei WU, Min CHENG, Jun-hui ZHANG

Research Articles

247 Seal contact performance analysis of soft seals on high-pressure hydrogen charge valves Zhen-hao LIN, Long-jie YU, Ting-feng HUA, Zhi-jiang JIN, Jin-yuan QIAN

257 Hydraulic directional valve fault diagnosis using a weighted adaptive fusion of multi-dimensional features of a multi-sensor Jin-chuan SHI, Yan REN, He-sheng TANG, Jia-wei XIANG

272 Dynamic performance and control accuracy of a novel proportional valve with a switching technology-controlled pilot stage Qi ZHONG, En-guang XU, Ti-wei JIA, Hua-yong YANG, Bin ZHANG, Yan-biao LI

286 Mechanism analysis and evaluation of thermal effects on the operating point drift of servo valves Jian KANG, Zhao-hui YUAN, Jing-chao LI

303 Data-driven fault diagnosis of control valve with missing data based on modeling and deep residual shrinkage network Feng SUN, He XU, Yu-han ZHAO, Yu-dong ZHANG

314 Analysis of fretting wear behavior of unloading valve of gasoline direct injection high-pressure pump Liang LU, Yin-peng XU, Meng-ru LI, Qi-long XUE, Man-yi ZHANG, Liang-liang LIU, Zhong-yu WU

Correspondence

329 Eccentric actuator driven by stacked electrohydrodynamic pumps Ze-bing MAO, Yota ASAI, Ardi WIRANATA, De-qing KONG, Jia MAN

No. 5

Review

335 Recycling Bayer and sintering red muds in brick production: a review Yu-jia XIAO, Michelle TIONG, Kim Hung MO, Ming-zhi GUO, Tung-chai LING

Research Articles

358 An analytical investigation of the collapse of asymmetrically corroded pipes under external pressure Sun-ting YAN, Ping TANG, Zhang-wei LING, Yong-gui CHEN

375 Vertical temperature gradients of concrete box girder caused by solar radiation in Sichuan-Tibet railway Tao SHI, Xing-wang SHENG,Wei-qi ZHENG, Ping LOU

388 Numerical study on ethylene-air continuous rotating detonation in annular combustors with different widths Wei-jie FAN,Wei-dong LIU, Hao-yang PENG, Shi-jie LIU, Jian SUN

405 Effect of the micro vortex generator on the characteristics of vaporized RP-3 kerosene combustion in supersonic flows Dong-peng JIA, Kai YANG, Yu PAN, Xi-peng LI, NingWANG

Correspondence

415 Influence of momentum ratio control mode on spray and combustion characteristics of a LOX/LCH4 pintle injector Rui ZHOU, Chi-bing SHEN

No. 6

Research Articles

421 Identification of ductile fracture model parameters for three ASTM structural steels using particle swarm optimization Ya-zhi ZHU, Shi-ping HUANG, Hao HONG

443 Analysis of dynamic stresses in ballasted railway track due to train passages at high speeds Jing HU, Xue-cheng BIAN

458 Towards autonomous and optimal excavation of shield machine: a deep reinforcement learning-based approach Ya-kun ZHANG, Guo-fang GONG, Hua-yong YANG, Yu-xi CHEN, Geng-lin CHEN

479 Design method for hypersonic bump inlet based on transverse pressure gradient Shang-cheng XU, YiWANG, Zhen-guoWANG, Xiao-qiang FAN, Bing XIONG

495 Flow-induced vibration characteristics of the U-type Coriolis mass flowmeter with liquid hydrogen Xiang-xiang PEI, Xiang LI, Hao-hao XU, Xuan-hong YE, Xiao-bin ZHANG

No. 7

Review

505 Review of elemental mercury (Hg0) removal by CuO-based materials Dong YE, Xiao-xiangWANG, Run-xianWANG, Xin LIU, Hui LIU, Hai-ningWANG

Research Articles

527 A comparison of sensitivity indices for tolerance design of a transmission mechanism Zhen-yu LIU, Han-chao XU, Guo-dong SA, Yu-feng LYU, Jian-rong TAN

543 Coordinated deformation control technologies for the high sidewall–bottom transfixion zone of large underground hydro-powerhouses Qi-xiang FAN, Zhi-yun DENG, Peng LIN, Guo LI, Ji-lin FU,Wei HE

564 Numerical analysis of the influence of a river on tunnelling-induced ground deformation in soft soil Jia-xin LIANG, Xiao-wu TANG, Tian-qiWANG, Yu-hang YE, Ying-jing LIU

Correspondence

579 Free-standing MXene/chitosan/Cu2O electrode: an enzyme-free and efficient biosensor for simultaneous determination of glucose and cholesterol Tao HU, Man ZHANG, Hui DONG, Tong LI, Xiao-bei ZANG, Xiao LI, Zhong-hua NI

No. 8

Research Articles

587 Design and friction loss study of full-ocean depth oil-filled direct current motor HaoWANG, Chen CAO, Jin GUO,WeiWANG, Peng ZHOU, Jia-wang CHEN

599 Flow control characteristics of the digital and mechanical redundancy control electric modulation valve He LIU, Bin ZHAO, BoWANG, Long QUAN, Yun-xiao HAO, Yun-wei LI

610 Effects of moisture content and dry bulk density on the thermal conductivity of compacted backfill soil Yu-hao WU, Yan-hao FENG, Li-wu FAN, QingWANG, Xin SONG, Zi-tao YU

621 How fast is it to city centers? The average travel speed as an indicator of road traffic accessibility potential Xiao-guang RUAN 639 Experimental study of the bearing capacity of a drainage pipe pile under vacuum consolidation Xiao-wu TANG,Wei-kang LIN, Yuan ZOU, Jia-xin LIANG,Wen-fang ZHAO

652 Active flow control of S-duct by plasma synthetic jet Ru-bing LIU, Xiao-yin MEI, Sheng-hui XUE, Yu-wen LU, Zhe-zhe SU, Qi LIN

No. 9

Research Articles

669 Environmental impact assessment of aircraft elevator made with new lightning protection material Shao-ce DONG, Cheng-gao LI, Gui-jun XIAN, Zhong-jie ZHAO, Xu-feng ZHANG, Qing-wen YUN

683 Elastoplastic behavior of frozen sand–concrete interfaces under cyclic shear loading Jian CHANG, Jian-kun LIU, Ya-li LI, QiWANG, Zhong-hua HAO

704 Influence of wettability in immiscible displacements with lattice Boltzmann method Chen ZHOU,Wen-yuanWANG, Ke-xin CHEN, Ze-jian CHEN, Jongwon JUNG,Shuai ZHANG, Yun-min CHEN, Bate BATE

721 Static control method using gradient–genetic algorithm for grillage adaptive beam string structures based on minimal internal force Yan-bin SHEN, Hao-song SUN, An-dong LEI, Xiao-yuan YING, Guang YANG, Yao-zhi LUO

733 Effects of the mixing degree upstream of the diverging area on the pollutant allocation characteristics of a braided river Jun ZOU, Jian-min ZHANG, Chang-yuan LI

745 Mask R-CNN and multifeature clustering model for catenary insulator recognition and defect detection Ping TAN, Xu-feng LI, Jin DING, Zhi-sheng CUI, Ji-en MA, Yue-lan SUN, Bing-qiang HUANG, You-tong FANG

No. 10

Research Articles

757 Modeling the optimal compensation capacitance of a giant magnetostrictive ultrasonic transducer with a loosely-coupled contactless power transfer system Tian LAN, Ping-fa FENG, Jian-jianWANG, Jian-fu ZHANG, Hui-lin ZHOU

771 Anthropomorphic hand based on twisted-string-driven da Vinci’s mechanism for approaching human dexterity and power of grasp Yong-bin JIN, Shao-wen CHENG, Yan-yan YUAN, Hong-taoWANG,Wei YANG

783 Effect of droplet superficial velocity on mixing efficiency in a microchannel Jin-yuan QIAN, Lei ZHAO, Xiao-juan LI,Wen-qing LI, Zhi-jiang JIN

795 Three-dimensional flow field mathematical model inside the pilot stage of the deflector jet servo valve Shuang-lu LI, Yao-bao YIN, Jiang-yang YUAN, Sheng-rong GUO

807 Effects of bump parameters on hypersonic inlet starting performance Shang-cheng XU, YiWANG, Zhen-guoWANG, Xiao-qiang FAN, Bing XIONG

820 Hydrodynamics of high-speed robots driven by the combustion-enabled transient driving method Yang YANG, Yingzhong LOU, Guanzheng LIN, Zhiguo HE, Pengcheng JIAO

Correspondence

832 Complex integrity constraint discovery: measuring trust in modern intelligent railroad systems Wen-tao HU, Da-wei JIANG, Sai WU, Ke CHEN, Gang CHEN

838 Regimes of near-stoichiometric hydrogen/air combustion under reciprocating engine conditions Anna E. SMYGALINA, Alexey D. KIVERIN

No. 11

Special Issue on Physical Model Testing in Geotechnical Engineering

Guest Editor-in-Chief: Zhen-yu YIN; Guest Editors: Han-lin WANG, Xue-yu GENG

Editorial

845 Physical model testing in geotechnical engineering Zhen-yu YIN, Han-linWANG, Xue-yu GENG

Research Articles

850 Influence of groundwater level changes on the seismic response of geosynthetic-reinforced soil retaining walls Fei-fan REN, Qiang-qiang HUANG, Xue-yu GENG, GuanWANG

863 Soil effect on the bearing capacity of a double-lining structure under internal water pressure Dong-mei ZHANG, Xiang-hong BU, Jian PANG,Wen-ding ZHOU, Yan JIANG, Kai JIA, Guang-hua YANG

882 Model test of the mechanism underpinning water-and-mud inrush disasters during tunnel excavation in sandstone and slate interbedded Presinian strata Peng XU, Peng PENG, Rong-hua WEI, Zhi-qiang ZHANG

900 Shaking table tests on a cantilever retaining wall with reinforced and unreinforced backfill Ming WEI, Qiang LUO, Gui-shuai FENG, Teng-feiWANG, Liang-wei JIANG

917 Frozen sand–concrete interface direct shear behavior under constant normal load and constant normal height boundary Jian CHANG, Jian-kun LIU, Ya-li LI

933 Evaluation of heavy roller compaction on a large-thickness layer of subgrade with full-scale field experiments Shu-jianWANG, Hong-guang JIANG, Zong-baoWANG, Yu-jieWANG, Yi-xin LI,Xue-yu GENG, Xin-yuWANG, KaiWANG, Yi-yi LIU, Yan-kun GONG

945 Visualizing the dynamic progression of backward erosion piping in a Hele-Shaw cell Gang ZHENG, Jing-bo TONG, Tian-qi ZHANG, Zi-wuWANG, Xun LI,Ji-qing ZHANG, Chun-yu QI, Hai-zuo ZHOU, Yu DIAO

No. 12

Review

955 Inkjet 3D bioprinting for tissue engineering and pharmaceutics Deng-ke ZHAO, He-qi XU, Jun YIN, Hua-yong YANG

Research Articles

974 Hole-growth phenomenon during pyrolysis of a cation-exchange resin particle Zheng-liang HUANG, Yun-bo YU, Qi SONG, Yao YANG, Jing-yuan SUN, Jing-daiWANG, Yong-rong YANG

988 Enhanced photocatalytic performance of S-doped covalent triazine framework for organic pollutant degradation Yi SHEN, Jing-yu HU, Lun LU, Chao ZHU, Qi-le FANG, Shuang SONG

998 Optimum insulation thickness of external walls by integrating indoor moisture buffering effect: a case study in the hot-summer-cold-winter zone of China Yan-hao FENG, Zi-tao YU, Jiang LU, Xu XU

1013 Investigations on lubrication characteristics of high-speed electric multiple unit gearbox by oil volume adjusting device Shuai SHAO, Kai-lin ZHANG, Yuan YAO, Yi LIU, Jun GU

1027 A novel stacking-based ensemble learning model for drilling efficiency prediction in earth-rock excavation Fei LV, Jia YU, Jun ZHANG, Peng YU, Da-wei TONG, Bin-ping WU