999精品在线视频,手机成人午夜在线视频,久久不卡国产精品无码,中日无码在线观看,成人av手机在线观看,日韩精品亚洲一区中文字幕,亚洲av无码人妻,四虎国产在线观看 ?

Support Vector Machine Assisted GPS Navigation in Limited Satellite Visibility

2021-12-10 11:54:58DahJingJwoJiaChyiWuandKuanLinHo
Computers Materials&Continua 2021年10期

Dah-Jing Jwo,Jia-Chyi Wu and Kuan-Lin Ho

Department of Communications,Navigation and Control Engineering,National Taiwan Ocean University,Keelung,202301,Taiwan

Abstract:This paper investigates performance improvement via the incorporation of the support vector machine(SVM)into the vector tracking loop(VTL)for the Global Positioning System(GPS)in limited satellite visibility.Unlike the traditional scalar tracking loop(STL),the tracking and navigation modules in the VTL are not independent anymore since the user’s position can be determined by using the information from other satellites and can be predicted on the basis of the states of the user.The method proposed in this paper makes use of the SVM to bridge the GPS signal and prevent the error growth due to signal outage.Similar to the neural network,the SVM is motivated by its ability to approximate an unknown nonlinear input-output mapping through supervised training.The SVM is employed for predicting adequate numerical control oscillator(NCO)inputs,i.e.,providing better prediction of residuals for the Doppler frequency and code phase in order to maintain regular operation of the navigation system.When the navigation processing is in good condition,the SVM is at the training stage,and the output information from the discriminator and navigation filter is adopted as the inputs.Other machine learning(ML)algorithms such as the radial basis function neural network(RBFNN)and the Adaptive Network-Based Fuzzy Inference System(ANFIS)are employed for comparison.Performance evaluation for the SVM assisted architecture as compared to the RBFNNand ANFIS-assisted methods and the un-assisted VTL will be carried out and the performance evaluation during GPS signal outage will be presented.The proposed design is very useful for navigationduring the environment of limited satellite visibility to effectively overcome the problem in the environment of GPS outage.

Keywords:Global positioning system;support vector machine;machine learning;vector tracking loop;signal outage

1 Introduction

The Global Positioning System(GPS)is a satellite-based navigation system[1,2]that provides a user with the proper equipment access to useful and accurate positioning information anywhere on the globe.Generally,the GPS receiver accomplishes the following two major functions:the tracking of pseudo-range and the solution of navigation information.The signal tracking tries to adjust the local signal to have the same code phase with the received satellite signal.Traditional GPS receivers track signals from different satellites independently.Each tracking channel measures the pseudo-range and pseudo-range rate,respectively,and then sends the measurements to the navigation processor,which solves for the user’s position,velocity,clock bias and clock drift(PVT).Blockage and reflections from buildings and other large,solid objects can lead to GPS accuracy problems.Recently,several researchers have studied a vector tracking loop(VTL)[3–11],such as a vector delay lock loop(VDLL)and a vector frequency lock loop(VFLL),and the combination of both,called VDFLL,to obtain an improved tracking performance in the GPS receiver.Vector tracking loops integrate the tracking loops and navigation processor,such that each tracking loop update is also based on information from other tracking loops.For the vector tracking loop GPS,the tasks of signal tracking and navigation state estimation are no longer separate processes.The vector tracking loop architectures provide several important advantages as compared to the scalar tracking loops.One of the merits is that the tracking loop can be assisted positioning when satellite signal outage.

In the last years,the field of machine learning(ML)is expanding and many new technologies are growing using these principles.The first applications of ML have been related to data mining,text categorization,and pattern/facial recognition.This new learning algorithm can be seen as an alternative training technique for polynomial,radial basis function and multi-layer perceptron(MLP)classifiers.The neural networks(NNs)[11–14]have been studied since Rosenblatt first applied the single-layer perceptron to pattern classification learning in the late 1950s.They are trainable,dynamic systems that can estimate input-output functions and have been applied to a wide variety of problems since they are model-free estimators,i.e.,without a mathematical model.An NN is a network structure consisting of a number of nodes connected through directional links.The importance of a NN includes the way a neuron is implemented and how their interconnection/topology is made.

Unlike the MLP networks,the radial basis function neural network(RBFNN)[11,15,16]has simple architecture of only three layers:input,hidden and output layers.In an RBFNN,only a single layer of nodes with radically symmetric basis activation functions is needed to achieve a smooth approximation to an arbitrary real nonlinear function.An adaptive neuro-fuzzy inference system or adaptive network-based fuzzy inference system(ANFIS)[15–20]is a kind of artificial neural network that is based on Takagi-Sugeno fuzzy inference system.As a combination of the Takagi-Sugeno fuzzy inference and neural network,the ANFIS can construct an input-output mapping based on both human knowledge(in the form of fuzzy if-then rules)and stipulated input-output data pairs.The purpose is to approximate unknown function or nonlinear inputoutput mapping through supervised training.They have been applied to wide variety of problems,for instance,approximate unknown function,the classification,the grade estimation,the design of the control system,since they are model-free estimator,i.e.,without a mathematical model.

Since the 1990s there has been a significant activity in the theoretical development and applications of Support Vector Machine(SVM)[21–25],which is a supervised learning model that divides the data into regions separated by a linear boundary that divides the different features.Among the various existing algorithms,the so-called SVM is one of the most recognized for classification and regression that permit the creation of systems which,after training from a series of examples,can successfully predict the output at an unseen location performing an operation known as induction.The paper makes use of the SVM to bridge the GPS signal and prevent the error growth due to signal outage and the results will be compared with the RBFNN- and ANFIS- based methods[11].

The remainder of this paper is organized as follows.In Section 2,preliminary background on GPS navigation filter with vector tracking architecture is reviewed.The machine learning algorithms is briefly reviewed in Section 3.The system model for GPS vector tracking loop assisted by machine learning module is introduced in Section 4.In Section 5,illustrative examples are presented to evaluation of the effectiveness and for performance comparison due to various ML algorithms.Conclusions are given in Section 6.

2 GPS Navigation Filter with Vector Tracking Architecture

The traditional scalar tracking loop(STL)processes signals from each satellite separately.Specifically,a delay lock loop(DLL)is used to track the code phase of the incoming pseudorandom code and a carrier tracking loop,such as a frequency lock loop(FLL)or a phase lock loop(PLL),is used to track the carrier frequency or phase.The tracking results from different channels are then combined to estimate the navigation solutions.The drawback of STL is that it neglects the inherent relationship between the navigation solutions and the tracking loop status.In that sense,a STL is more like an open loop system and provides poor performance when scintillation,interference,or signal outages occur.

The vector tracking loop(VTL)provides a deep level of integration between signal tracking and navigation solutions in a GNSS receiver and results in several important improvements over the traditional STL such as increased interference immunity,robust dynamic performance,and the ability to operate at low signal power and bridge short signal outages.The architecture of the vector tracking loop(VTL)can be different depending on its implementation.The tracking input is not directly connected to the tracking control input rather the discriminator output is used in estimating pseudoranges.The extended Kalman filter(EKF)[26]in turn predicts the code phases.In VTL all channels are processed together in one processor which is typically an EKF.Therefore,even if the signals from some satellites are very weak the receiver can track them from the navigation results of the other satellite.VTL is a very attractive technique as it can provide tracking capability in degraded signal environment.Fig.1 shows the system architectures for scalar tracking loop and vector tracking loop.

The conventional VTL based on the discriminator consists of correlator,discriminator and NCO.The loop filter is removed in each channel.The VTL discriminator outputs of each channel are passed to the navigation filter.These are used as the measurement of the navigation filter.The Doppler frequency and the pseudoranges are calculated from the estimated user position and velocity of the navigation filter.In general,it is known that the VTL based on the discriminator gives users an accurate position and Doppler frequency than the scalar vector tracking loop.The VTL based on the discriminator cannot deal with several problems,such as a rejection of channel with a low quality signal,high dynamic situation and others.The system architecture of the VTL is shown as in Fig.1.The integrity check algorithms are used to detect the possible error in each channel to prevent the spreading of the error.

The EKF is used for estimation of the navigation states in GPS receivers.The process model and measurement model for the EKF can be written as

xk+1=f(xk)+wk

zk=h(xk)+vk

where the state vector xk∈?n,process noise vector wk∈?n,measurement vector zk∈?m,and measurement noise vector vk∈?m.Both the vectors wkand vkare zero mean Gaussian white sequences having zero crosscorrelation with each other:

whereE[·]represents expectation,and superscript “T”denotes matrix transpose,Qkis the process noise covariance matrix,Rkis the measurement noise covariance matrix.

Figure 1:The system architecture of a vector tracking loop

The discrete-time extended Kalman filter algorithm is summarized as follow:

?Correction steps/measurement update equations:

?Prediction steps/time update equations:

Further detailed discussion can be referred to Brown et al.[26].

3 Machine Learning Algorithms

In this section,three machine learning algorithms adopted in this paper are briefly reviewed,including the RBFNN,ANFIS and SVM.The RBFNN has simple architecture of only three layers:input,hidden and output layers.The ANFIS is a combination of the Sugeno fuzzy inference and neural network to approximate unknown function or nonlinear input-output mapping through supervised training.A SVM is a supervised learning model that divides the data into regions separated by a boundary that divides the different features.

3.1 The Radial Basis Function Neural Network

The RBFNN possesses an equivalent structure to the so-called optimal Bayesian equalization solution,and it can provide the conditional density function(CODF)of the transmitted symbols.Fig.2 shows the architecture of a typical RBFNN.The overall response of the RBF networkF(x)using Gaussian function?j(x)can be formulated as

and

where x is the input pattern;mj=1,...,Nrepresents the centers of the RBF network,which have the same dimensionality as the input vector ;‖·‖ denotes the Euclidean norm;?j(·)is the Gaussian(basis)function of the j-th neuron;σis a positive constant representing the width of the RBF;wjis the weight of the RBF network;andbis the bias;pis the number of inputs;Jis the number of neurons in the hidden layer(also the number of centers for the RBF).

whereNis the number of training pattern.The above equation can be written in the simplified form

The weigh vector W is calculated by the pseudoinverse matrix method

And the output of the RBF network is given by

“If you fell and I threw my back out trying to help you, who would take care of us?” Grandma would ask him. She was adamant3 about their taking care of themselves and living independently.

Figure 2:Architecture of a radial basis function neural network(RBFNN)

3.2 The Adaptive Network-based Fuzzy Inference System

Proposed by Jang in 1993[15],the adaptive network-based fuzzy inference system(ANFIS)is a multilayer feed-forward network where each node performs a particular node function on incoming signals,in which Takagi and Sugeno’s type fuzzy inference is employed.The ANFIS employed in the present work has the architecture as shown in Fig.3,which is composed of five layers given as follows:

Figure 3:The adaptive network-based fuzzy inference system(ANFIS)architecture

3.3 The Support Vector Machine

A support vector machine is a supervised learning model that divides the data into regions separated by a boundary.There are two approaches for the SVM optimization,the linear and the non-linear kernels,depending on the nature of the problem.The main idea behind the technique is to separate the classes with a surface that maximizes the margin between them.They map the input(x)into a high-dimensional feature space(z=φ(x))and construct an optimal decision boundary called the separating hyperplane.In general,SVMs find a classification function that separates data classes,with the largest margin,using a hyperplane.The principal difference between all machine learning algorithms regardless of the application,is the mathematical operation involved in calculating the optimal separating hyperplane.Fig.4 shows a binary classification example of linear SVM.The linear boundary here divides the red triangles from the blue circles.If the training data is linearly separable,two parallel hyperplanes can be selected that separate the two classes of data,so that the distance between them is as large as possible.The region bounded by these two hyperplanes is called the margin,and the maximum-margin hyperplane is the hyperplane that lies halfway between them.The samples/data points on the margin are called support vectors.

A hyperplane can be written as the set of points x satisfying wTx ?b=0,where w is the(not necessarily normalized)normal vector to the hyperplane.The parameterb/‖w‖ determines the offset of the hyperplane from the origin along the normal vector w.With a normalized or standardized dataset,these hyperplanes can be described by the equations wTx ?b=1(anything on or above this boundary is of one class,with label 1)and wTx?b=?1(anything on or below this boundary is of the other class,with label ?1).Geometrically,the distance between these two hyperplanes is 2/‖w‖ so to maximize the distance between the planes we want to minimize ‖w‖.

For SVMs with L1soft-margin formulation,this is done by solving the primal problem:

The parameterCis a penalty factor to control the trade-off between training error and generalization ability and its value is chosen by means of a validation set.The problem of the Lagrange dual form is:

with constraints

Figure 4:A binary classification example of linear support vector machine(SVM)

4 Vector Tracking Loop Assisted by Machine Learning Module

Figure 5:(a)The vector tracking loop assisted by the machine learning(ML)module;and(b)the training procedure for the ML

5 Illustrative Examples

Simulation experiments had been carried out to evaluate the navigation performance for the proposed approach,i.e.,with ML aiding for overcoming the problem of signal outage,in comparison with the standard VTL designs.The computer codes were developed by the authors using the Matlab? software.The commercial software Satellite Navigation(SatNav)toolbox for Matlab? by GPSsoft LLC.Reference[27]was employed for generating the satellite positions and pseudoranges.A simulated vehicle trajectory originating from the position of North 25.1492 degrees and East 121.7775 degrees at an altitude of 100 m.This is equivalent to[?3042329.2 4911080.2 2694074.3]Tm in the WGS-84 ECEF coordinate system.The location of the origin is defined as the(0,0,0)m location in the local tangent East-North-Up(ENU)frame.

The test trajectory is shown in Fig.6.Shown in Fig.7,the satellite constellation at the initial time of simulation involves 9 SV’s available in the open sky,where the satellites are numbered with a space vehicle identifier(SV ID).The skyplots for the three scenarios are indicated by three blocks.In Scenario 1,the GPS signals are available on the west where there are 4 satellites available.In this scenario,signal outage at two time intervals has been assumed,including 125–165 s and 245–285 s,respectively.In Scenario 2,the GPS signals are available on the south where there are 4 satellites available on the south,while in Scenario 3,one satellite signal(i.e.,SV 6)was blocked out and the case where only 3 GPS signals available are involved.The measurement noise variancesrρiare assumeda prioriknown,which is set as 9m2.Let each of the white-noise spectral amplitudes that drive the random walk position states be/rad/sec.In addition,let the clock model spectral amplitudes besec andSg=1.58These spectral amplitudes were used to find the Qkparameters in Eq.(20).

Figure 6:The vehicle trajectory for simulation

Figure 7:The satellite constellation at the initial time of simulation indicates that there are 9 SV’s available in the open sky;the visible satellites for the three scenarios involved are indicated by three blocks

(1)Scenario 1:4 GPS signals available on the west

In this case,there are 4 GPS signals available with the visible satellites inside the red block in Fig.7.The cases that GPS signal outages occur on the east at the time interval 125–165 s and 245–285 s,respectively,are simulated.The results demonstrate the effectiveness for the performance enhancement.Fig.8 provides the position errors for the standard VTL as compared to that assisted by the SVM at the time interval 125–165 s.In the case that GPS signal outage on the east at the time interval 245–285 s is simulated,the results are shown in Fig.9.The results based on the VTL with the various ML algorithms,including RBFNN,ANFIS,and SVM are compared.Fig.10 provides comparison of position RMS errors for the three approaches and the SVM outperforms the other two.

Figure 8:Position errors for the VTL without and with the SVM:Scenario 1 with signal outage at time interval 125–165 s

Figure 9:Position errors for the VTL without and with the SVM:Scenario 1 with signal outage at time interval 245–285 s

(2)Scenario 2:4 GPS signals available on the south

In the second example,it is assumed that there are 4 GPS signals available on the south with visible satellites inside the blue block in Fig.7.The GPS signal outage on the north is simulated.Fig.11 provides the position errors for the standard VTL as compared to that assisted by SVM.Comparison of position RMS errors for the three ML approaches:RBFNN,ANFIS,and SVM,is shown in Fig.12.

Figure 10:Comparison of position RMS errors based on the three ML approaches for Scenario 1 with signal outage at time intervals:(a)125–165 s;(b)245–285 s

Figure 11:Position errors for the VTL without and with the SVM for Scenario 2

Figure 12:Comparison of position RMS errors for the three approaches for Scenario 2

Figure 13:Position errors for the VTL without and with the SVM(3 GPS signals available)

(3)Scenario 3:3 GPS signals available on the south

In the third example,a case that only 3 GPS signals are available is simulated.The visible satellites for this example are indicated inside the green block in Fig.7.Fig.13 provides the position errors for the standard VTL as compared to that assisted by SVM.The results based on the VTL with the three ML approaches are shown as in Fig.14.The example has demonstrated remarkable performance improvement in such a case of relatively poor geometry.Comparison of position RMS errors for the various approaches is shown as in Fig.15 which shows the SVM method is very promising.

Figure 14:Position errors for the VTL with the RBFNN,ANFIS,and SVM(3 GPS signals available)

In addition to positioning accuracy,the computational cost/convergent time is also studied.In the time intervals of GPS signal outages,which are set to be 40 s in the simulation.The total times for executing the navigation Kalman filter with ML module is about 18–19 s for RBFNN,5-6 s for ANFIS,and 2–3 s for SVM,respectively.The SVM possesses better computational efficiency.

Figure 15:Comparison of position RMS errors for the three approaches(3 GPS signals available)

6 Conclusions

This paper investigates the incorporation of the SVM algorithm into the vector tracking loop for improving performance in limited visibility of GPS satellites.The method makes use of the SVM module to predict the code phase from the Kalman filter,and to bridge the GPS signal so as to prevent the error growth during signal outage.In addition to the SVM,two other types of ML algorithms involved are the RBFNN and the ANFIS.Several examples have been provided for illustration.

The ML assisted architecture exhibit remarkable benefit in the case where sufficient numbers of visible satellites are available.Some performance comparison for the three types of algorithms has been also provided.Based on the reports from the literatures for various applications,different results are revealed regarding the performance comparison for various ML algorithms according to different situations.In this preliminary study,we have concentrate on the feasibility of performance improvement based on the support of ML modules.The results show that the VTL based on the proposed design has demonstrated the capability of ensuring proper functioning of navigation system and provide improved performance,especially for the GPS signal outage environment.The SVM in the case of 3 GPS signals available has demonstrated very promising results,in terms of both accuracy and computational efficiency.Further work on the test and evaluation of the design can be carried out such that more advanced design for better applicability can be obtained based on the idea addressed in the paper.

Funding Statement:This work has been partially supported by the Ministry of Science and Technology,Taiwan(Grant numbers MOST 104-2221-E-019-026-MY3 and MOST 109-2221-E-019-010).

Conflicts of Interest:The authors declare that they have no conflicts of interest to report regarding the present study.

主站蜘蛛池模板: 亚洲一区二区三区在线视频| 手机永久AV在线播放| 国产成人高清精品免费| 亚洲精品无码AV电影在线播放| 国产美女人喷水在线观看| 成人国产精品网站在线看| 极品性荡少妇一区二区色欲 | 国产另类乱子伦精品免费女| 色综合中文| 国产精彩视频在线观看| 一级做a爰片久久免费| 国产不卡一级毛片视频| 99热这里只有精品在线观看| 中文天堂在线视频| 亚洲欧美日韩高清综合678| 在线免费观看a视频| 日本不卡视频在线| 婷婷开心中文字幕| 黄色网在线免费观看| 欧美激情二区三区| 国产真实自在自线免费精品| 六月婷婷激情综合| 五月天丁香婷婷综合久久| 污污网站在线观看| 日本欧美中文字幕精品亚洲| 亚洲综合狠狠| 五月天久久综合| 婷婷五月在线| 91久久偷偷做嫩草影院电| 成年女人a毛片免费视频| 一本大道在线一本久道| 久久精品91麻豆| 99青青青精品视频在线| Jizz国产色系免费| 亚洲国产亚洲综合在线尤物| 精品人妻系列无码专区久久| 国产在线视频二区| 伊人91视频| 亚欧成人无码AV在线播放| 老司机aⅴ在线精品导航| 热久久国产| 999精品在线视频| 日韩毛片在线视频| 日韩中文精品亚洲第三区| 97在线视频免费观看| 91精品啪在线观看国产| 亚洲成人77777| 国产美女视频黄a视频全免费网站| 日韩精品一区二区三区swag| 奇米影视狠狠精品7777| 中美日韩在线网免费毛片视频 | 国产成人精品午夜视频'| 无码人中文字幕| 99国产精品国产高清一区二区| 91午夜福利在线观看| 国产欧美在线视频免费| 国产亚洲精品97在线观看| 91人妻日韩人妻无码专区精品| 99久久国产综合精品2020| 国产在线欧美| 国产在线一区二区视频| 天天综合网亚洲网站| 国产女人18毛片水真多1| 99久久亚洲综合精品TS| 茄子视频毛片免费观看| 中文字幕乱妇无码AV在线| 亚洲人成亚洲精品| 久久无码av三级| 99久久无色码中文字幕| 大学生久久香蕉国产线观看| 91色爱欧美精品www| www中文字幕在线观看| 色天堂无毒不卡| 视频二区国产精品职场同事| 乱人伦中文视频在线观看免费| 久久人妻系列无码一区| 中国毛片网| 激情综合五月网| 国产欧美日韩在线在线不卡视频| 亚洲综合第一区| 1024国产在线| 伊人网址在线|