盒子美國加利福尼亞州卡爾弗市

設計單位：埃里克·歐文·莫斯建筑師事務所

主要顧問：Kurily, Syzmansky, Tchircow, Inc.(結構)，John Snyder and Assoc.(電氣)

項目類型：辦公室

建筑面積：12 000平方呎

時間: 1994年

獲獎：AIA/LA，設計獎，1994年杜邦本尼迪克圖斯獎，1995年AIA/CC，1995年設計榮譽獎

攝影：湯姆·邦納

Architect: Eric Owen Moss Architects

Key Consultants: Kurily, Syzmansky, Tchircow, Inc.(Structural), John Snyder and Assoc.(Electrical)

Program: Office

Building Area (Square Feet): 12 000sf

Year: 1994

Awards: AIA/LA, Design Award, 1994 DuPont Benedictus Award, 1995 AIA/CC, Design Honor Award 1995

Photography: Tom Bonner

“盒子”（Box）是一種介入結構，是對卡弗爾市國家大道上現有倉庫的組織和結構的補充?！昂凶印庇腥齻€概念部分。第一個是位于現有倉庫建筑一層的圓柱形接待區，垂直延伸，與單層桁架支撐的屋頂相交。實體屋頂的部分原桁架屋頂結構被圓柱體包圍，現已被移除并采用玻璃進行替代。圓柱體位于國家大道的一個新前門附近，圓柱體內部和周圍空間成為接待區。在接待區圓柱體內部的一堵新墻后面，一個新的外部樓梯通向二層屋頂平臺，支撐在原來的桁架系統下面，并懸掛在圓柱體上，該圓柱體上原來的屋頂已被拆除。新甲板與屋頂圓柱形切口之間的空間采用了玻璃窗，使得接待區能夠充分照射陽光。在第二層和第三層兩個額外的外部樓梯拐彎處，樓梯就變成了內部樓梯，并與通向第三層的內部樓梯相連。

“盒子”本身采用鋼腿吊起，鋼腿傾斜形成了會議室地板的支撐梁。橫梁被定位為兩個平面，在平面中交叉成X形，在兩個橫梁的腹板上有一個球形切口，以便為在開放式二樓辦公桌上的人員提供空間，該辦公桌位于“盒子”下方，接待區上方?！昂凶印彼坪踉谝粋€鋼球上滾動。

The Box is an intervention, an addition which modifies the organization and structure of an existing warehouse on National Boulevard in Culver City.The Box has three conceptual parts.The first is a cylindrical reception area located on the ground floor of the existing warehouse building, extending vertically to intersect the one-story, truss supported roof.The solid roof over the portion of the original truss roof structure, encircled within the cylinder, is removed and replaced with glass.The cylinder is positioned near a new front door from National Boulevard, and the space in and around the cylinder becomes a reception area.Behind a new wall just inside the cylinder in the reception space, a new,exterior stair leads to a second level roof deck, supported on the original truss system below, and suspended over the cylinder where the original roof was removed.The space between the new deck and the cylindrical incision in the roof is glazed, bringing natural light to the reception area.Up two additional turns of the exterior stair, halfway between levels two and three, the stairway becomes internal, and connects with an interior stair which leads up into the third floor Box itself.

The Box itself is lifted on steel legs which lean to form the conference room floor support beams.The beams are positioned as two planes that cross as an X in plan, with a spherical cut-out in the webs of the two beams in order to provide clearance for occupants on the open second floor desk below the Box and above the reception space.The Box appears to roll on a steel sphere.

軸測圖 Axon